Dwyer Mark II 25 Equivalent Differential Pressure Manometer 0-650pa

Description

Product material: ABS
Working temperature: -40~60℃
Maximum pressure: 200KPa (2abr)
Filling fluid: red oil, density 0.786kg/dm3 (15℃)
Safety: This differential pressure gauge has a special structure to prevent liquids from overpressure.

The pressure difference range of this product is -10~600 PA. It is suitable for clean rooms or rooms with pressure difference between adjacent compartments. The pressure difference gauge can be installed vertically on the wall and can be embedded in parallel with the surface, or it can be directly fixed on the wall. On the wall. When installing, pay attention not to be too close to the return air duct, exhaust air duct or supply air duct to avoid indication errors. There are HIGH (high pressure) and LOW (low pressure) on the differential pressure gauge, and the differential pressure gauge is usually placed in a relatively high-pressure room.

We use advanced ultrasonic kneading to change the PE molecular structure of the shell and the cover, so that the red oil molecules cannot pass through, and there will be no oil leakage, simple and effective! And compared with traditional manual non-guaranteed bonding, the welding speed is 20 times faster, ensuring high efficiency and quality production!
PVC double color pipe, upgraded new PVC material, double color is easier to distinguish

To ensure that no oil leakage is used, the large milliliters of PVC-40MM low volatile red oil (with a density of 0.826 for the imported meter and 0.826) is provided as a supporting package, and the bottle cap is also ultrasonically sealed! The injection plastic raw materials are all new materials, and the quality is naturally unique!

Red oil differential pressure gauge installation method
1. Install the differential pressure gauge on the surface or vertical plane with ruthenium through the two mounting holes.
2. Adjust the horizontal position again, so that the blisters in the horizontal waste are in the center position.
3. Then loosen the zero button 3~4 turns (can be marked and read the circle)
4. Start to inject red oil into the differential pressure gauge, unscrew the plug of the liquid injection hole, and inject the red oil bottle from the liquid injection hole until the red oil is close to the 0 mark, and screw it tightly.
5. The red oil differential pressure gauge is adjusted to zero. After the red oil is stable, turn the zero adjustment button under normal pressure to make the zero point align with the red oil level.
6. Finally, use the red oil differential pressure gauge hose to connect the “High” and “Low” of the high pressure, low pressure and differential pressure gauges respectively, so that the differential pressure gauge is installed.

Further info :

Ancor Sdn Bhd

D-2-4, Setiawalk, Pusat Bandar Puchong,47160 Puchong, Selangor, Malaysia

Web: https://ancor.biz/

Whatsapp :  +6012-921 3877

Tel : +603-5879 7121