Dwyer Magnehelic 0-10kPA 2000-10kPA Differential Pressure Gauge

Description

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES
Indicate Positive, Negative or Differential, Accurate within 1%
No Power Required
Low Cost
Used in Isolation/ Hospital Environments and Temporary Units (no power required)
Bezel provides flange for flush mounting in panel. Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.

Specifications:

Service Air and non-combustible, compatible gases
May be used with hydrogen
Pressures must be less than 35 psi
Housing Die cast aluminum case and bezel, with acrylic cover
Exterior finish is coated gray to withstand 168 hour salt spray corrosion test
Accuracy ±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100 PA, -125 PA, -10 MM
±4% (-HA ±2%) on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C)
Pressure Limits -20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar)
MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar)
Enclosure Rating IP67
Overpressure Relief plug opens at approximately 25 psig (1.72 bar), standard gages only
Temperature Limits 20 to 140°F (-6.67 to 60°C)
-20°F (-28°C) with low temperature option
Mounting Orientation Diaphragm in vertical position
Process Connections ⅛” emale NPT duplicate high and low pressure taps – one pair side and one pair back
Dimensions 4″ (101.6 mm) diameter dial face